Clean, pure water - all the time - at your fingertips. For your safety, for your health, for your life...

Contact Us

 

613-523-7800

or Toll Free at

1-877-523-7800

 

 

Whole House Fluoride Water Filter

Products

AWF Counter Top
AWF Under Counter
AWF Whole House
AWF Reverse Osmosis
AWF Specialty Filters
AWF Filter Faucets
AWF Chillers & Coolers
AWF Shower Filters
AWF Commercial
AWF Portable & Inline
AWF Ultraviolet Light
AWF Other Options

 
Other Products

AWF Water Purifiers

AWF Air Purifiers

AWF Waterless Cookware

AWF Juice Extractors

AWF Food Storage

AWF Cutlery

 
Search
 
Water filters have full satisfaction guarantees
 
Buy water filters using Visa or Mastercard
 
Buy American
 

The "Big Blue" Whole House Fluoride Water Filter

 

Fluoride, arsenic or nitrates filtration

 

This product includes a 50 to 5 micron gradient pre-filter, a 20" Fluoride Filter and a carbon block cartridge.

There are plenty of good reasons for installing a fluoride water filter. The fluoride that is added to water also contains other toxic materials and pollutants, which may include lead, mercury, and arsenic. Hundreds of renowned scientists and researchers around the world condemn, or refuse to endorse fluoridation of the water supply. The fluoride water filter is a simple solution to a vexing problem. You may not have any control over what goes into your water, but this simple device can easily take it right back out.

 

About the Fluoride Filter:


The Whole House Fluoride Cartridge effectively removes fluoride from the water. Rated for up to 4 gpm (gallons per minute) flow, lasts approximately 8 to 12 month. 4.5" X 20". Fits industry-standard Big Blue housings.

 

If you would like to purchase replacement Fluoride Filter Cartridges, please call 1-877-523-7800 or write to sales@americanwaterfilter.com

 

About the Fluoride Filter Housing:


"Big Blue" Whole House Water Filter Housing for industry-standard 4.5" X 20" cartridges. Measures 24" tall X 7.28" across. 1" female pipe thread inlet and outlet.

 

Includes pressure release buttons, shut-ott valves, mounting bracket with screws, housing wrench and an extra pre-filter. Made from the highest quality FDA grade NSF listed polypropylene. Rated to 125 psi, 125 degrees F.

 

Capacity (<100 ppm hardness):
Maximum temperature:
Minimum temperature:
Maximum pressure:
Minimum pressure:
9,000 ppm fluoride estimated
100°F (38°C)
40°F (5°C)
125 PSI (8.6 bar)
20 PSI (1.4 bar)
Materials of Construction End Caps: Polypropylene Inner/Outer Wraps: Polyolefin Netting: Polyethylene Gaskets: Buna-N